Frustrated with your HP Printer not Turning On? Here’s How to Fix It!

Have you ever had the frustrating experience of trying to print an important document, only to find that your HP printer won’t turn on? It’s a common problem that many printer owners have faced, and it can be incredibly frustrating when you’re under a time crunch. There are a few reasons why your HP printer might not be turning on, and it’s important to diagnose the issue before you can fix it. In this blog post, we’ll explore the common causes of a malfunctioning printer and provide you with some tips and tricks to get your HP printer up and running again.

So, let’s get started and troubleshoot that printer!

Check Power Source

If you’re facing the aggravation of an HP printer that won’t turn on, it’s best to start with the most obvious solution – your printer’s power source. Make sure the printer is fully plugged in and that the outlet is functioning correctly by plugging in another device. Additionally, check if there’s a power switch and ensure you turn it “on” before attempting to power up the printer.

If there are no issues with your outlet, power switch, or cord, try pressing the printer’s power button once more. If you still can’t get your HP printer to come to life, it might be time to consider other reasons why it’s not working.

Ensure outlet is working

When it comes to setting up appliances or electronic devices, one of the most important things to check is the power source. Before you plug anything in, ensure that the outlet you are using is in good working condition. This means that it should be properly grounded and able to deliver the appropriate amount of voltage.

You can test the outlet by using a small electrical device like a lamp or a phone charger. If the device does not work when plugged in, then the outlet is likely not working properly. In these cases, it’s important to call a professional electrician to fix the issue to prevent damage to your appliances or risk of electrocution.

Taking the time to check your power source can save you a lot of time, money and hassle in the long run.

hp printer won't turn on

Check power cord for damage

When it comes to troubleshooting problems with your device, one important aspect to check is the power source. Sometimes, the power cord may be damaged and this can cause issues with your device. So, if you’re experiencing problems, the first step is to take a look at the power cord and examine it for any damage.

This could be anything from frayed wires to cracks or splits in the casing. If you do see any damage, it’s important to replace the cord as soon as possible to avoid any electrical hazards or further damage to your device. And remember, always make sure to properly disconnect and reconnect any power cords to avoid damaging the cord or your device.

By taking a quick look at your power source, you can save yourself time and money in repairs while ensuring that your device is working at its best!

Check Printer Connections

If your HP printer won’t turn on, the first thing you should check is the printer connections. It’s possible that the power cord isn’t securely plugged in or that the power outlet is malfunctioning. Make sure that the power cord is plugged in tightly to both the printer and the outlet, and try plugging it into a different outlet to see if that solves the issue.

Additionally, check any USB or Ethernet cables that are connected to your printer to make sure they are securely plugged in. In some cases, a loose connection can cause the printer to not turn on. By checking your printer connections, you can eliminate this potential issue and potentially save yourself time and money in repair costs.

Ensure all connections are secure

When setting up your printer, it’s important to ensure all connections are secure. This can prevent any issues with printing or potentially damaging the device itself. One area to pay special attention to is the printer connections.

These can sometimes become loose or disconnected, which can cause the printer to malfunction or not work at all. To avoid this, be sure to check all connections between the printer and other devices, such as your computer or power source. Make sure everything is tightly connected and the cords aren’t tangled or pulled taut.

By taking the time to ensure all printer connections are secure, you can save yourself the hassle of troubleshooting issues later on.

Check USB cable for damage

When your printer is acting up, one of the main things you should check is the USB cable connecting it to your computer. This cable is how your printer communicates with your computer, and any damage to the cable can cause issues with printing. To check the cable, make sure it is securely plugged in to both your printer and your computer.

Then, examine the cable for any visible damage such as fraying or bending. If you see damage, it’s time to replace the cable. Even if you don’t see any damage, it’s a good idea to try a different cable just in case.

By taking the time to check your USB cable, you can avoid many frustrating printing issues and ensure your printer is working properly.

Reset Printer

If you’re experiencing the issue of your HP printer not turning on, there may be a simple solution. One of the first troubleshooting steps is to reset the printer. To do this, unplug the power cord from the back of the printer, as well as from the electrical outlet.

Wait at least 60 seconds, then plug the power cord back into the outlet and then the printer. Press the power button to turn the printer on and see if it resolves the issue. This simple reset can often resolve the problem of a printer not turning on and getting you back to printing in no time.

Remember to always check your power source and ensure that it is functioning correctly as well. Don’t hesitate to reach out to HP support for additional assistance if the problem persists.

Unplug printer for 30 seconds

If you’re having issues with your printer, such as it not responding or printing out blank pages, one simple solution to try is resetting it by unplugging it for 30 seconds. This may seem like an easy fix, but it can often solve the problem. When you unplug the printer, it resets the internal software, which could have been causing the issue.

It’s important to ensure that the power cord is fully removed from both the printer and the outlet for the full 30 seconds. After the 30 seconds is up, plug the printer back in and turn it on. You should see the printer power up and go through a brief self-diagnostic process.

Once this is complete, try printing again and see if the issue has been resolved. This quick and easy fix can save you time and frustration, potentially avoiding the need for more complicated troubleshooting.

Plug printer back in and try turning on

If you’re having trouble with your printer not turning on, the first thing to try is resetting it. Start by unplugging the printer from the power source and waiting for a few minutes. This will give the printer time to discharge any residual current and clear its memory.

Next, plug the printer back in and try turning it on. This simple reset can often fix minor issues with printers that are not turning on. If the printer still won’t turn on, there may be a more significant problem, and you may need to contact the manufacturer or a professional repair service for help.

Remember to always take precautions when dealing with electrical equipment and never attempt repairs that you don’t feel comfortable with. With a simple reset, you may be able to get your printer back up and running in no time.

Check for Error Lights

If your HP printer won’t turn on, the first thing you need to do is check for error lights. Most printers have LED lights that indicate if there is any issue with the printer. A blinking or solid red light can tell you that there is a problem that needs to be resolved before your printer can turn on.

If there are no error lights, then the problem may lie with the power source. Make sure your printer is properly plugged in and that the outlet is functioning. Try plugging in the printer to a different outlet to see if that solves the issue.

Sometimes, printers can also go into a sleep mode, which can make it appear like it’s turned off. In this case, try pressing the power button to wake up the printer and see if that helps. If all else fails, it may be time to refer to the printer manual or call in a technician to diagnose and repair the problem.

Remember, don’t panic if your HP printer won’t turn on – there are always solutions available!

Note any error lights or messages

When your computer or electronic device encounters a problem, it will often indicate this through an error light or message. These signals can provide valuable information about what is going wrong and why your device isn’t functioning as it should. It is important to pay attention to any error lights or messages that appear, as they can often point to the root of the problem.

Some error messages may be vague or difficult to understand, but others may provide specific details about the issue. By noting any error lights or messages and taking the necessary steps to address them, you can help to ensure that your device runs smoothly and stays in good working order. So, the next time you encounter an error light or message on your computer or other electronic device, take a moment to investigate and determine what steps you need to take to fix the problem.

By doing so, you can avoid more serious issues down the line.

Contact HP Support

If your HP printer won’t turn on, you can contact HP support to troubleshoot the problem. Before doing that, check if your printer is plugged in and turned on. Also, make sure that there are no issues with the power outlet or cable.

If everything seems to be in working order, you can try resetting your printer. The reset process varies for different models, so refer to your printer’s manual for instructions. If none of these steps work, don’t worry, HP support is just a call or chat away.

They have a team of experts who can help you diagnose and fix the issue. Just provide them with the necessary information, such as your printer’s model and serial number, and they’ll guide you through the process. So don’t give up on your printer just yet, let the HP support team help you get it back up and running.


In conclusion, if your HP printer won’t turn on, it’s time to channel your inner detective skills and investigate the root cause. From checking the power source to ensuring all connections are secure, to troubleshooting any hardware or software issues, there are a variety of solutions available. But don’t get too frustrated – even the most reliable technology can have its off-days.

As they say, when in doubt, try turning it off and on again!”


What could be the reason my HP printer won’t turn on?
There could be multiple reasons why your HP printer won’t turn on. It could be due to a faulty power supply, damaged cord or cable, improper connection, or issues with the printer’s internal hardware.

How can I fix my HP printer that won’t turn on?
Firstly, ensure that the power cord is properly connected to both the printer and the power supply. Try using a different power outlet or cord if necessary. Check if the printer’s power button is switched on and try pressing it again. If these steps don’t work, consider seeking professional assistance or contacting HP support.

Is it safe to try fixing my HP printer if it won’t turn on?
Yes, to some extent, but only if it’s a simple and straightforward fix. Unplugging the printer, checking the power source, or rebooting the system can often solve the problem. However, if you’re not experienced with handling printers, it’s best to seek professional help to avoid causing further damage.

How can I prevent my HP printer from not turning on in the future?
Always ensure that the printer is properly connected to the power source, and avoid power surges by utilizing a surge protector. Regularly clean your printer to prevent dust buildup and other debris from causing internal malfunctions. Additionally, don’t overload the printer with too many print jobs at once, which can put added strain on the device’s mechanics.